you are the designer of the 3d printed housing? Could you make it narrower so a bambu a1 mini can print it? Thanks
Did you print the modified one that I uploaded that was designed for this new camera?I used some random 3M double sided tape I had lying around. I may consider re-printing the camera cover to put some slots in the first layer for the double-sided tape to fit so the cover can fit 100% flush with the cross bar. I don’t think anyone but me would notice, but the double sided tape does make the camera cover sit a little bit above the surface of the cross bar at the top of the toneau cover. Also, my camera was a very weird shape so I ended up having to hog out the inside with a dremel. If I reprinted, I would try to modify the internal structure to fit the camera exactly.
I'm not the original designer, I modified one that I found on thingverse. I don't know how wide the A1 mini prints, but can't you simply scale to fit in the Bambu software? Then you might have a little to Dremel out so the camera still fits.
Did you ever end up pulling the footage to see if the quality was the same?
On screen there is a different hue to each camera as I would expect since the cameras are different cameras with different sensors. Not sure why someone would want a color match. Both are different hues from stock Tesla cameras as well. To me this isnt an issue as long as the image quality is good which it is.
I slapped together a quick video to demonstrate the quality and color differences. Overall, it's fine as far as seeing license plates and street signs.
I see we have the same “problem” the rear camera sky is perpetually grey.
Yes it almost appears to have a filter applied to the footage. Definitely not as vibrant as the front camera.
I saw that it says 2k/4k, does that mean it can record in 2k or 4k or maybe the front camera is just a higher quality 4k camera and the rear is 2k?
Do you think the plastic cover thing has anything to do with it since the front camera is open and the rear one is in a shadow so to say since it has the shroud over it? Personally as long as the quality is good and you can see what you need to I wouldn't care, but I do see what you're talking about visually.
Thank you for posting this, Ken. This v2 Hannshow Mirror will most likely be the next upgrade to my CT.
Mine is grey and washed out. Perhaps they have a few models of the rear camera.Driving right now and just snapped a pic and gosh, the sky looks blue to me.