Laser68
Member
- First Name
- Lance
- Joined
- Apr 19, 2025
- Threads
- 2
- Messages
- 18
- Reaction score
- 42
- Location
- Home
- Vehicles
- CT
- Occupation
- retired
- Thread starter
- #1
Trip to Ruidosa goes off grid of Tesla superchargers past Post Texas. The trip requires a charge as the elevation change is a drain on the battery. Post Texas to Roswell New Mexico requires about 85 percent battery so no problem there.
Arriving in Roswell another solution was required rather than the Tesla home charger options offered. I was able to purchase an adapter for a CCS speed charger that allowed me to use Francis Energy in Roswell. The charger charged at 88kw/hr which is very adequate and required only a 45 min charge.
I learned a valuable lesson when we arrived in Ruidosa and used another Francis Energy CCS CHARGER with the new adapter. Upon charging and after about 25 percent added I smelled burning. The CT quickly shut down the charge. Upon inspection the adapter was completely fried. We thought we had a bad adapter. Ordered another from Amazon and arrived two days later. We tried again and it worked. Then half way through the charge we noticed it failed again. What we noticed was the hose is soo heavy it created a gap in the connection. To remedy the situation we put a yeti cooler as support and no more issues.
Adapter: https://a.co/d/2Asy38b
Pics attached.
Arriving in Roswell another solution was required rather than the Tesla home charger options offered. I was able to purchase an adapter for a CCS speed charger that allowed me to use Francis Energy in Roswell. The charger charged at 88kw/hr which is very adequate and required only a 45 min charge.
I learned a valuable lesson when we arrived in Ruidosa and used another Francis Energy CCS CHARGER with the new adapter. Upon charging and after about 25 percent added I smelled burning. The CT quickly shut down the charge. Upon inspection the adapter was completely fried. We thought we had a bad adapter. Ordered another from Amazon and arrived two days later. We tried again and it worked. Then half way through the charge we noticed it failed again. What we noticed was the hose is soo heavy it created a gap in the connection. To remedy the situation we put a yeti cooler as support and no more issues.
Adapter: https://a.co/d/2Asy38b
Pics attached.
Sponsored