AverageJoe
Well-known member
- First Name
- John
- Joined
- Jun 15, 2025
- Threads
- 7
- Messages
- 156
- Reaction score
- 106
- Location
- Olive Hill, KY
- Vehicles
- 2024 CT AWD, 2022 MYP, 2016 MX 90D
- Occupation
- Retired Military, House Husband
- Thread starter
- #1
Powerwall replaces Powershare.I really wanted the PowerShare to work but with $4k quoted for installation and no battery backup unless you opt in for a $17k powerwall option, I opted to go with a Ecoflow delta pro ultra, for $5k they have a inverter, battery and smart home panel that backs up the entire home, solar ready option and allows me enough time to plug in the CT as a generator so I can charge the battery and power the house in case of a blackout![]()
My install was cheap ($2,400) and my only other backup is a portable generator. So it's been convenient for the few failures we've had since. Will be a pain if I move though, since I'll have to decide if I remove it or leave it; especially if the gateway ever becomes unavailable.btw, anyone using PowerShare and consider it a value investment?
How'd you get it for that price?My install was cheap ($2,400) and my only other backup is a portable generator. So it's been convenient for the few failures we've had since. Will be a pain if I move though, since I'll have to decide if I remove it or leave it; especially if the gateway ever becomes unavailable.
Main breaker separation install, cheapest of the options.How'd you get it for that price?
I have been looking more into the whole home battery backup. Even for use as a charge anywhere option, not necessarily a range extender.I really wanted the PowerShare to work but with $4k quoted for installation and no battery backup unless you opt in for a $17k powerwall option, I opted to go with a Ecoflow delta pro ultra, for $5k they have a inverter, battery and smart home panel that backs up the entire home, solar ready option and allows me enough time to plug in the CT as a generator so I can charge the battery and power the house in case of a blackout![]()
None of the three electricians that quoted my Powerwall installation would put the AC on the backed up panel so I opted out. Without AC it didn’t make sense to me.I love my PowerShare system, transformer blew and half my town lost power when it was 98 degrees, all my neighbors were packing to stay with family and I was chilling with my ac keeping my house at 68 with days of power…barely knew I even lost power because it only took a second or two to switch over.
I have the PowerShare installed. What actually IS nice is that it integrates fine with pre-existing solar, whereas the solar previously de-activated when the utility power went down, which was exactly the wrong time to lose that power. The NEMA 14-50 solution might work too with solar, or not, but would require either a manual cutover back to utility power, bringing the truck power and, especially, the solar power all the way down first (else a phase mismatch), or to automate everything, it would require circuitry on par with the PowerShare units anyway.Brings to mind questions or assumptions:
They will never get PowerShare/CT and PowerWall 3s to work together.
They have a large inventory of un purchased PowerShare bundles.
They anticipate much lower cybertruck and PowerShare take rate.
People are jerryrigging (not that guy) dirt cheap CT battery to house with main cutoff using the 14-50 to handle blackouts.
or all of the above
what did I miss?
btw, anyone using PowerShare and consider it a value investment?
14-50 and solar probably wouldn't get along. Bed outlet would be fixed frequency likely without power import capability.I have the PowerShare installed. What actually IS nice is that it integrates fine with pre-existing solar, whereas the solar previously de-activated when the utility power went down, which was exactly the wrong time to lose that power. The NEMA 14-50 solution might work too with solar, or not, but would require either a manual cutover back to utility power, bringing the truck power and, especially, the solar power all the way down first (else a phase mismatch), or to automate everything, it would require circuitry on par with the PowerShare units anyway.
In that way it is money pretty well spent.
I paid 10k to install Powershare, plus paid $2500 for the Gateway, I got 2 free universal wall connectors from referrals.I really wanted the PowerShare to work but with $4k quoted for installation and no battery backup unless you opt in for a $17k powerwall option, I opted to go with a Ecoflow delta pro ultra, for $5k they have a inverter, battery and smart home panel that backs up the entire home, solar ready option and allows me enough time to plug in the CT as a generator so I can charge the battery and power the house in case of a blackout![]()