Cyberbeard
Active member
- First Name
- Hector
- Joined
- Nov 26, 2024
- Threads
- 2
- Messages
- 32
- Reaction score
- 14
- Location
- USA
- Vehicles
- Cyber Truck
- Thread starter
- #1
IS THIS NORMAL TO SEE THE TONNEAU BARS LIKE IN THE PICTURE WHILE CLOSED?
No, the bar went one slat farther up so you didn't see it. They commented on the bar after adding mine.I did have them add the missing slat... was it there not before with the missing slat?
One thing you have to be careful about with the bar showing (which I also see on mine) is that it can jam the tonneau while opening if you put something long like a ladder in the bed of the truck that catches on the bar. That is how I discovered the bar being there on mine.IS THIS NORMAL TO SEE THE TONNEAU BARS LIKE IN THE PICTURE WHILE CLOSED?![]()
it was always like this, regardless of added slat or not. I think you misunderstood what the OP is asking about, these are the bars, and they were always thereIf you had them recently add the missing slat then yes it is now normal.
Yeah... that's what I figured. When we take trips out of town for sports I usually pack the truck to the gills and stack things up back there closes to the windows because of the added room. Im starting to worry if this is going to be a issue nowOne thing you have to be careful about with the bar showing (which I also see on mine) is that it can jam the tonneau while opening if you put something long like a ladder in the bed of the truck that catches on the bar. That is how I discovered the bar being there on mine.
The hinge locations where bars go are always there, but adding the slat shifts the cross bar position such that it is visible when the vault is closed.it was always like this, regardless of added slat or not. I think you misunderstood what the OP is asking about, these are the bars, and they were always there
![]()
When the missing slat is added, the cross bar ends up changing position and blocks art of the rear window. Totally normal, and if you read the service manual for how the missing slat is added, you’ll see why this occurs.I did have them add the missing slat... was it there not before with the missing slat?
Mine looked like that before the extra slat and after.If you had them recently add the missing slat then yes it is now normal.
If the support bar was in the same location after adding a slat... where did the added slat go??Mine looked like that before the extra slat and after.