FSD 13.2.2 stopped working!

[Oscar]

FSD Just stopped working for me too. Anyone have any insight? Or fixes yet since this has been going on for a while.

1. First check if you have any strikeout. If you had 5 times, FSD will be suspended for one week.
2. If not, turn off FSD and drive your CT a little bit, then turn it back on. This is the trick I learned before.
3. If not, reboot your CT.
4. If not, shut down your CT and restart it after two minutes.
5. If not, stop by a service center, the technician can enter the service mode and may diagnose the problem.

For my case, even the technician couldn’t find anything wrong, but it works afterwards!

Good luck!

 

[REM]

13.2.2 for the CT should have never been released right before the holiday freeze. Very poor performance.

 

[SCTesla]

13.2.2 for the CT should have never been released right before the holiday freeze. Very poor performance.

It's exponentially better than V12. I'm not sure of the issues you are having, but it's the best version I've had for FSD...no glaring bugs in the software...of course it's not finished, yet, but huge step forward. Most seem to think that

 

[Oscar]

It's exponentially better than V12. I'm not sure of the issues you are having, but it's the best version I've had for FSD...no glaring bugs in the software...of course it's not finished, yet, but huge step forward. Most seem to think that

I totally agree that it is significantly better. As I said before, no software is bug free, that is the reality.

 

[REM]

It's exponentially better than V12. I'm not sure of the issues you are having, but it's the best version I've had for FSD...no glaring bugs in the software...of course it's not finished, yet, but huge step forward. Most seem to think that

There must be some vast disparity in experience. My truck on 13.2.2 is crossing center lines sometimes by a couple feet and bouncing left to right in the lane. Stops and turns are smooth, so it doesn't make sense. 13.2.1 erased the issue with hugging the center line, but it returned in this version.

Not sure what's going on. Maybe a strange calibration issue?

 

[SCTesla]

There must be some vast disparity in experience. My truck on 13.2.2 is crossing center lines sometimes by a couple feet and bouncing left to right in the lane. Stops and turns are smooth, so it doesn't make sense. 13.2.1 erased the issue with hugging the center line, but it returned in this version.

Not sure what's going on. Maybe a strange calibration issue?

Maybe, but I think that is/will be a big issue for Tesla in the future. The cars behave so differently, even in the same conditions/roads.

 

[Known-Background]

1. First check if you have any strikeout. If you had 5 times, FSD will be suspended for one week.
2. If not, turn off FSD and drive your CT a little bit, then turn it back on. This is the trick I learned before.
3. If not, reboot your CT.
4. If not, shut down your CT and restart it after two minutes.
5. If not, stop by a service center, the technician can enter the service mode and may diagnose the problem.

For my case, even the technician couldn’t find anything wrong, but it works afterwards!

Good luck!

Didn’t really work. I asked service if they could push a firmware update so I could reload it. I downloaded and reinstalled and it works for now. No idea it seems random. Maybe there’s a series of actions that one does that can lead to the FSD failure or the other issue with the adaptive driving failure code. The the later I just had to power down and restart the truck. This FSD nothing seemed to work, until I got the firmware reinstalled. We will see how long this lasts. I hope there’s a minor software update soon.

 

[Oscar]

Didn’t really work. I asked service if they could push a firmware update so I could reload it. I downloaded and reinstalled and it works for now. No idea it seems random. Maybe there’s a series of actions that one does that can lead to the FSD failure or the other issue with the adaptive driving failure code. The the later I just had to power down and restart the truck. This FSD nothing seemed to work, until I got the firmware reinstalled. We will see how long this lasts. I hope there’s a minor software update soon.

Glad to know it worked out. Actually, updating the firmware is the technical told the guy at the front desk. But he never did, and I don’t bother to ask either, since it works.