Reset Frunk Height to highest setting?

[MetalBonsai]

I was messing with setting the frunk height and saved it to a lower height, but now I don't know how to reset it to the max height. Help?

I looked in the manual and I couldn't find anything about resetting the height.

 

[cybercoffee]

can you push it manually up all the way, and then press and hold the button?

 

[MetalBonsai]

can you push it manually up all the way, and then press and hold the button?

I would if they didn't caution against manually closing it. Maybe pushing it open is ok?

Cybertruck Manual:
"CAUTION Do not try to manually close the powered frunk. Doing so may cause damage."

 

[CyberGus]

“Open the powered frunk, then manually lower or raise it to the desired opening height. Press and hold the powered frunk button on the front of the vehicle for three seconds until you hear a confirmation chime. Confirm that you have set it to the desired height by closing the powered frunk, then reopening it.”

https://www.tesla.com/ownersmanual/cybertruck/en_us/GUID-F2E1AC08-A176-4A97-ACB2-F5C215F93BEB.html

 

[MetalBonsai]

“Open the powered frunk, then manually lower or raise it to the desired opening height. Press and hold the powered frunk button on the front of the vehicle for three seconds until you hear a confirmation chime. Confirm that you have set it to the desired height by closing the powered frunk, then reopening it.”

https://www.tesla.com/ownersmanual/cybertruck/en_us/GUID-F2E1AC08-A176-4A97-ACB2-F5C215F93BEB.html

Not sure how I missed that. Thank you for pointing it out!

(Just did this) yep, it's that easy.

 

[darkfyre]

can you push it manually up all the way, and then press and hold the button?

This is correct and is exactly how all (the models I have seen) work. It's good they stuck with this for CT too.