Help! Blank front screen after soft reset

[al4er]

After soft reset (holding two button's together) the front screen won’t start and can’t switch to D or R.

The back screen works, AC works, voice commands work, CT is charging, can use phone to interact with it.

Tried doing reset two more times, holding the breaks, etc…

 

[CyberGus]

That’s … weird, but don’t forget you can shift with the overhead buttons

 

[Tony stank]

Had this happen after software update. Needed to do a 12v reset to get it back.

 

[al4er]

That’s … weird, but don’t forget you can shift with the overhead buttons

Now everything is restored. The overhead console did not work…

 

[al4er]

Checked the CT 30 min later - the front screen and the overhead console still did not work.

checked after 6 hours - everything restored.
?

 

[al4er]

Had this happen after software update. Needed to do a 12v reset to get it back.

Thanks, I thought doing it, but saw some post about similar issue with model 3, where the person just waited overnight and it helped. Worked for me as well.
No explanations…

 

[Woodrick]

Checked the CT 30 min later - the front screen and the overhead console still did not work.

checked after 6 hours - everything restored.
?

Going into deep sleep solves a lot of issues.

 

[AnthonyJ]

Happened to me too. Known issue with 2024.8.12. If this happens to anyone else, you should turn off Sentry Mode and exit the app, let it go into deep sleep. Should be back in a few hours or so. Or you can disconnect and reconnect the accessory battery

 

[ItsDrew]

After soft reset (holding two button's together) the front screen won’t start and can’t switch to D or R.

The back screen works, AC works, voice commands work, CT is charging, can use phone to interact with it.

Tried doing reset two more times, holding the breaks, etc…

That's exactly why I posted this: https://www.cybertruckownersclub.co...en-went-black-and-wouldnt-come-back-up.14869/

 

[SDLCyberTruck41]

How do you reset the accessory battery as mentioned?