New taillight cover designs just dropped!

[CybertruckWraps]

Customize your ride with our unique custom cut vinyl overlays for your tail lights. The top Cybertruck Silhouette is always visible if truck is on and then the bottom graphic (hedgehog or the cerberus) will show beautifully when either brakes or a blinker is applied! We use only the best Matte Oracal premium cast film for these, cutting no corners! See below for more info about the vinyl used. We also have prepared these with transfer tape so that you don't loose any detail when removing from the backing and apply to the truck.

Order here!

Also if anyone has any design requests for this, please DM me! Cheers!

Sponsored

 

[ABILISK]

Sweet idea! But that’s totally a hedgehog, not a badger.

 

[CybertruckWraps]

You are right! I purchased the files and the file name says badger, but yeah it’s a hedgehog. I will be correcting! Thank you!

Sweet idea! But that’s totally a hedgehog, not a badger.

 

[Art138]

Says sold out….let us know when you replenish.

 

[CybertruckWraps]

Says sold out….let us know when you replenish.

Fixed!

 

[Derektsla]

Very nice! Cool concept. Personally, I would like to see just the bottom with a graphic so it’s a surprise to people when they see me brake or turn signal.

if it looks bad with only half the lens covered. Maybe a smaller square on top?

 

[Cybertruck.Supply]

Your Cerberus is missing his nose…

 

[TexasRaider]

Customize your ride with our unique custom cut vinyl overlays for your tail lights. The top Cybertruck Silhouette is always visible if truck is on and then the bottom graphic (hedgehog or the cerberus) will show beautifully when either brakes or a blinker is applied! We use only the best Matte Oracal premium cast film for these, cutting no corners! See below for more info about the vinyl used. We also have prepared these with transfer tape so that you don't loose any detail when removing from the backing and apply to the truck.

Order here!

Also if anyone has any design requests for this, please DM me! Cheers!

My only concern is not enough light coming out for safety. If you have a cover on a safety light and there is an accident, the CT driver could be at fault for covering the required light. (Law enforcement experience.)
Not opposed to designs, of course. Just difficult to have a rad design in a small area without impacting safety.

 

[CybertruckWraps]

My only concern is not enough light coming out for safety. If you have a cover on a safety light and there is an accident, the CT driver could be at fault for covering the required light. (Law enforcement experience.)
Not opposed to designs, of course. Just difficult to have a rad design in a small area without impacting safety.

I see your point and it’s valid. Although one can argue that blinker is more eye catching than normal. ?

 

[CybertruckWraps]

Very nice! Cool concept. Personally, I would like to see just the bottom with a graphic so it’s a surprise to people when they see me brake or turn signal.

if it looks bad with only half the lens covered. Maybe a smaller square on top?

I will test this for you! I dont think it would be noticeable if the sticker stopped in the black area. Will test this and get pics for you!

 

[TexasRaider]

I see your point and it’s valid. Although one can argue that blinker is more eye catching than normal. ?

True. I just would want to be transparent with the purchaser/CT owner.

 

[CybertruckWraps]

Very nice! Cool concept. Personally, I would like to see just the bottom with a graphic so it’s a surprise to people when they see me brake or turn signal.

if it looks bad with only half the lens covered. Maybe a smaller square on top?

I will test this for you! I dont think it would be noticeable if the sticker stopped in the black area. Will test this and get pics for you!

Here you go.

 

[TexasRaider]

Here you go.

Woo I do like these.

 

[Derektsla]

Here you go.

Nice. Am I correct that the Top is brake and bottom is turn signal?

Sponsored