Frunk Hooks for Groceries, Bags and Other Things (3D Print File Inside)

[TECH49]

I used PETG on the Engineering Plate with the default support settings.

It's just a little "crunchy" on the bottom edge of the inside edge of the tab where the hole is.

DM me with your email and I'll send you the .3mf file.

 

[Administrator]

Sonny has shared the file and here it is on our server for download:

Frunk Hooks STL file (download)

https://www.cybertruckownersclub.com/forum/CYBERTRUCK-HOOK-XL.STL

 

[EvilNuff]

thanks for the response. I also printed them on the side, but what kind of supports did you use? Appreciate any help as I’m new to 3-D printing.

Sorry if I am being too basic here about supports but in 3d printing if you have material that overhangs you use extra filament to create a support structure (usually from the plate to underneath the overhang) depending on if your printer can change filament mid-print you can make it out of a separate support material that is easier to break away. Your slicer will have support settings that should help you set this up.

Now that the stl file has been shared (thank you!) I can print these for anyone in the Dallas area who is interested, just shoot me a pm.

 

[Cyber_P]

Did you all remove the cover to install I'm guessing? Was afraid.to pull too hard.

 

[TECH49]

Yes, but it's easy and doesn't take much force.

Here's how I did it. You don't need to remove it to put these clips in.

 

[getsometom]

Seeing this makes me want to buy a 3D printer. It seems fun to be able to print your own shapes. But I don't have much experience with them and don't know if the investment in one will work out.

 

[Bkb13]

There’s always something useful coming out of this community. Great job on this. I will absolutely print them up.

 

[docowen]

I was able to print several of them and tried to change the logo to white. I don’t think I quite got the entire area selected as it ended up a bit small. Perhaps I will try again. I also used, automated supports which made the print come out nice. Thank you for sharing.

 

[65SoYoLO]

Thank you!

No Thank YOU!!! I asked my nephew to print me out a couple since he has 2 or 3 3d printers. I was in no rush but went by his house the other day to say hello and he surprised me with the best gift ever.
STAINLESS STEEL PRINTED Hooks! They are absolutely perfect. No burrs or imperfections that I can see. He gave them to me as a "New Truck" gift but I asked how much and they were 35 bucks!
Very pricy but he said they have to be SS, it just wouldn't be right. Lol

 

[Gkingdom]

Would you mind asking how much he would charge to make me some?

QUOTE="65SoYoLO, post: 328997, member: 24830"]
No Thank YOU!!! I asked my nephew to print me out a couple since he has 2 or 3 3d printers. I was in no rush but went by his house the other day to say hello and he surprised me with the best gift ever.
STAINLESS STEEL PRINTED Hooks! They are absolutely perfect. No burrs or imperfections that I can see. He gave them to me as a "New Truck" gift but I asked how much and they were 35 bucks!
Very pricy but he said they have to be SS, it just wouldn't be right. Lol

[/QUOTE]

 

[65SoYoLO]

Would you mind asking how much he would charge to make me some?

He did not print then, he had them printed by a company. I will ask him since I don't have the box anymore.

 

[panthar]

Why so much hassle… aren’t these good ?

https://a.co/d/eC2KmAg

 

[panthar]

Another one

https://www.walmart.com/ip/806260371

 

[65SoYoLO]

Why so much hassle… aren’t these good ?

https://a.co/d/eC2KmAg

To each his own. If that's what your want, that's what you should get.

 

[panthar]

To each his own. If that's what your want, that's what you should get.

Haha true … agree .. it’s personal choice …