Frunk Hooks for Groceries, Bags and Other Things (3D Print File Inside)

[Dclewis]

Check out these little hook I designed and 3d printed them. I thought they are useful, for me at least. You could hang what ever you could think of.

Here is what I use them for. Not many companies making little accessories for the CT, so I make and use them.

No drill or screw at all. No modify to any factory parts at all. Double sided tape is optional, but I don’t use it. You could still open the cover to access you HEPA filter.

UPDATE: Since some member requested the 3D print STL file, here is the link to download the hook design file.

Am I doing something wrong? I can’t access the STL?

 

[bryanle1]

Same. When you have time, can you enable access? Thanks!

 

[SONNYDUT]

Send me your email, Gmail would be good.

 

[Kalease]

Thanks for posting.

uploading these to printables or thingiverse, would make administrative work much easier.

 

[SONNYDUT]

My file is larger than the forum allow

 

[SONNYDUT]

Sharing the STL files?

I have been sharing with a provide email, preferably Gmail. I use Google Drive sharing

 

[EvilNuff]

I have been sharing with a provide email, preferably Gmail. I use Google Drive sharing

The problem is many of us have requested access and that isn't being granted. If you would upload them to any of the various 3d printing file sites that would be much appreciated!

 

[themuleman]

Do you want us to request individual access to the file? I was not able to access the google drive location.

 

[SONNYDUT]

Do you want us to request individual access to the file? I was not able to access the google drive location.

Could you send me your email. I will attach the file to it, in a reply.

 

[themuleman]

Could you send me your email. I will attach the file to it, in a reply.

Sent you a PM with my email. Thank you so much!

 

[themuleman]

How are you orienting the print on the plate? I'm getting a little distortion on the top hole when I orient the STL on its side - since it starts that section without any support. Maybe it's a printer setting. Not sure. I'm running a Bambu P1S

LOVE the CT symbol you added!

 

[Kroton]

Would be great if you could upload it to printables, makerworld, thingiverse or another site focused on sharing 3d print files.

 

[Kalease]

Would be great if you could upload it to printables, makerworld, thingiverse or another site focused on sharing 3d print files.

Agree, I mentioned the same a few times. Would help with adoption and would ease the admin overhead of requesting and granting access.

 

[TECH49]

How are you orienting the print on the plate? I'm getting a little distortion on the top hole when I orient the STL on its side - since it starts that section without any support. Maybe it's a printer setting. Not sure. I'm running a Bambu P1S

LOVE the CT symbol you added!

I printed them laying on the side with supports.

 

[themuleman]

I printed them laying on the side with supports.

thanks for the response. I also printed them on the side, but what kind of supports did you use? Appreciate any help as I’m new to 3-D printing.