What Are You Hauling in your Cybertruck? 🦾 👷‍♂️

[Fabville]

here are some of my configs:

I use the tmat system to stablize loads/protect the bed. would definitely recommend it!

How do you like the Tmat? I came across them recently and might look at getting one later. From reviews I’ve read, sounds like the attachments have worked themselves loose for some people. I was thinking of some custom 3d printed mounts to use with it.

Sponsored

 

[Fabville]

Monster Energy fridge for our cabin. I was going to transport it upright, but the previous owner transported it on its back before. I’ll let it stand for a few weeks anyways before plugging it in to let the oil settle back.

 

[EWELON]

How do you like the Tmat? I came across them recently and might look at getting one later. From reviews I’ve read, sounds like the attachments have worked themselves loose for some people. I was thinking of some custom 3d printed mounts to use with it.

I really like it. would definitely recommend. it has been very useful. no issues with the mounts so far, especially the tight fit ones. the whole system is clearly 3d printed so I imagine you could do lots to expand it if you had your own printer. they also make screw mountable inserts that you can add to anything. I used them to make this contraption:

https://www.cybertruckownersclub.co...-tmat-x-toughbuilt.48455/page-2#post-30669462

one small downside: it (obv) raises your truck bed by about 1cm so take that into account.

if you decide to go into the tmat accessory business, definitely post your ideas/prints here for us to see!

 

[kpanda17]

3000 lbs 1/2 cord of wood
1/2 cord fits and tonneau closed

photo is after a few taken out

 

[kpanda17]

3000 lbs 1/2 cord of wood
1/2 cord fits and tonneau closed

photo is after a few taken out

Use a tarp to keep wood chips from going deep underneath
Be very careful tarp does not get caught in tonneau track

CT drove like the 3,000 wasn’t even there

 

[HiTecArms]

Hauling our Stainless Steel Fridge....

 

[hemiarch]

Hauling our Stainless Steel Fridge....

This is the moment. right @dalton108 ?

 

[HaulingAss]

3000 lbs 1/2 cord of wood
1/2 cord fits and tonneau closed

photo is after a few taken out

Do you know what kind of wood that is? It looks like it packs some good BTU's.

Be aware that if you could close the tonneau cover, it was not a proper 1/2 cord of wood. A cord is defined as 128 cu. ft., stacked to minimize air gaps. The Cybertruck bed is listed by Tesla as 56 cu. ft. but that almost certainly follows the established standard of measuring to the flush open top of the bed sides. Volume under the tonneau is likely a bit less. An honest half cord should stack into a cuboid of 64 cu. feet.

There is no functional problem with hauling wood without a tarp. Bark chips and dirt can fall into the area around the Smuggler's Bay lid, but I find it easier/quicker to blow out than to deal with tarps. Tarps are good for finer materials like sand, topsoil, pea-gravel, etc.

I love wood heat, enjoy your fires!

 

[HaulingAss]

This is the moment. right @dalton108 ?

It's the moment you realize the Cybertruck looks a lot better than any kitchen appliance or garbage dumpster. The similarity is barely skin deep.

 

[OMFG]

Finally got around to hauling more than my JD tractor…this time cattle to the sale barn. Looks on their faces was priceless.

Edit…attaching link to TikTok video ranch neighbors kid made as we were headed out:

 

[Administrator]

Keep those hauling photos coming!

Sponsored