Starlink: The Ultimate Mount Solution!

[4 SPACE]

i just used the rear 120v outlet and attached to the tail gate. So far it has not got in the way of loading or unloading stuff. Its out of the way and goes good with white truck. can be removed in seconds if needed.

Sponsored

 

[canyoncarver]

i just used the rear 120v outlet and attached to the tail gate. So far it has not got in the way of loading or unloading stuff. Its out of the way and goes good with white truck. can be removed in seconds if needed.

That looks cool but I put mountain bikes there.

 

[pricedm]

that looks great! Are the UBC outlets in the back powerful enough to run it and can you keep those powered on when parked?

I use this Amazon power cord from Cybertruck's USB-C to Starlink, as recommended here by others. https://www.amazon.com/dp/B0DSC1DJN5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

 

[Hookalakupua]

I used the Mars AG set up for mine.

 

[4 SPACE]

I used the Mars AG set up for mine.

i like that mount where did you run the power cord?
did you go to the 110v outlet

 

[4 SPACE]

i like that mount where did you run the power cord?
did you go to the 110v outlet

Also does the top of the starlink follow the same angle as the truck bed? i was about 1°
how far does it hang past the left side of the bed

 

[Hookalakupua]

i like that mount where did you run the power cord?
did you go to the 110v outlet

I decided to connect the mini to my PeakDo battery that I have stored/secured in my bed, using this L-Track mounted bag.

https://a.co/d/j5lOdT4

This way the mini is just in sleep mode and when I need it, I don’t have to go through an entire reboot.
I then have the Starlink power cord running from my bed outlet, directly to the USB-C port on the PeakDo in order to charge it when needed. Otherwise, the cord fits in the bag above. I’ll get some pictures up tomorrow.

 

[Hookalakupua]

Also does the top of the starlink follow the same angle as the truck bed? i was about 1°
how far does it hang past the left side of the bed

Yes, it follows it almost perfectly and hangs past the left side about 3”.

 

[Hookalakupua]

Here are pictures of the setup when in and not in use.

 

[Ozark Cyber]

Here are pictures of the setup when in and not in use.

Wow nice setup.

 

[SlegMD]

Anyone seen any good molle mounts for mini or regular? Figured I’d try here before I scour the internets

 

[Hookalakupua]

Anyone seen any good molle mounts for mini or regular? Figured I’d try here before I scour the internets

I considered these but never got around to testing it as went a different route.

https://www.etsy.com/listing/4330546959/


https://www.dometic.com/en-us/produ...eq0EFnzD-k0Bi6oYWIVoxiKnwKlG_cPwaAunyEALw_wcB

 

[SlegMD]

I considered these but never got around to testing it as went a different route.

https://www.etsy.com/listing/4330546959/


https://www.dometic.com/en-us/produ...eq0EFnzD-k0Bi6oYWIVoxiKnwKlG_cPwaAunyEALw_wcB

Thanks for the lead, 2nd might be doable

 

[4 SPACE]

Is the mars expedition mount metal or plastic?
how long would it take to remove the SL Mini to remove it from the holder to move it to second vehicle

 

[kpanda17]

Anyone seen any good molle mounts for mini or regular? Figured I’d try here before I scour the internets

this one works great
https://a.co/d/1dipIdS

you can even adj tilt to max adjust
Easy to move between vehicles

Minis WiFi spread is approx 200 feet insane

Snap in this battery and no limitations
https://a.co/d/8zYkvgs

Sponsored