Looking for A-pillar harness connector

[TickTock]

I want to tap into the A-pillar harness (PN 1682255-00-F) at the connector below the trim (don't want to splice wires). Looks like a 2x7 arrangement. Anyone know the Molex(?) part number just for the connector?

 

[TickTock]

I want to tap into the A-pillar harness (PN 1682255-00-F) at the connector below the trim (don't want to splice wires). Looks like a 2x7 arrangement. Anyone know the Molex(?) part number just for the connector?

Found it!

Male:
Housing: Sumitomo 6098-3877
Terminals: Sumitomo 8100-3623

Female:
Housing: Sumitomo 6098-3917
Terminals: Sumitomo 8100-3625

It's a common part also used on Toyota Lexus. Found a source on AliExpress

 

[mongo]

Found it!

Male:
Housing: Sumitomo 6098-3877
Terminals: Sumitomo 8100-3623

Female:
Housing: Sumitomo 6098-3917
Terminals: Sumitomo 8100-3625

It's a common part also used on Toyota Lexus. Found a source on AliExpress

You may have already found this, but the service page has a connector reference with housings and terminals.
https://service.tesla.com/docs/Cybertruck/ElectricalReference/prog-242/connector/g0001/index.html

 

[Zorro]

I want to tap into the A-pillar harness (PN 1682255-00-F) at the connector below the trim (don't want to splice wires). Looks like a 2x7 arrangement. Anyone know the Molex(?) part number just for the connector?

What application are you using the harness for?

 

[TickTock]

What application are you using the harness for?

I find the BSI indicators too dim during the daytime so I want to tap into the BSI signals to send to a PIC microcontroller. Plan is to have that energize haptic vibration motors in the driver's seat. Using a PIC since they are almost as cheap as a transistor and allows me to control the feel better. Can start with a larger signal when it first appears and then periodic weak pulsing if the vehicle remains.