Cybertruck wrapped in TWRAPS Tanzanite Blue PPF

[TWRAPS]

Hey gang

Showcasing another beautiful wrap a customer DIYed - TWRAPS Tanzanite Blue.

Why TWRAPS?

🦾 DIY Wrap
We've developed the most advanced CT wrap template on the market using our own CT. How is it different?

• Designed in-house and iterated with changes based on real world feedback, with bespoke relief cuts (not generic) and 1/2" wrap around the edges for long lasting hold
• Most beginner friendly with full install video (2hrs long)
• 0 disassembly required!
• Wraps in places others didn't even see (such as the back side of the quarter panel, near the tail lights)
• Gives you shop level results with a pre-cut kit
• So far - 100% success rate (just check the customer reviews). Most people report full install takes them 8-10 hours.

Check it out:
https://twraps.com/products/cybertruck-ppf-color-wrap

Live Install Support
For those of you who DIY, we offer live install support via phone, video, text and email, including on weekends. Meaning that if you run into any issues or have any questions during the install, there will be an experienced installer ready to help you remotely within minutes.

Pro Install
If DIY is not your thing, you can get our wrap professionally installed at one of these locations. We help coordinate everything, so you have a seamless online experience.

• Concord, CA ($2,000)
• Columbus, IN ($2,000)
• Atlanta, GA ($2,500)
• Oklahoma City, OK ($2,000)
• Pottstown, PA ($2,500)
• Las Vegas, NV ($2,500)
• Charleston, SC ($2,500)
• Chicago Metro, IL ($3,000)

Colors
We offer over 300 colors of PPF.
You can browse our digitalized TWRAPS Swatch Books at the below link, notice you can filter by finish, color etc, or you can just rent the physical swatch books for a refund once you return them.

• Browse the Digital catalog
• Rent the Swatch Books

Quality
TWRAPS is premium 8mil PPF, made with US sourced TPU resins and glue. It's self healing (with heat), chemically resistant with UV blocking additives to reduce fading over time. With good care, it will last for 7-10 years. And when you need to remove it, it comes off clean (with heat again) letting you either change colors, go back to the CT's birthday suit or just return your lease without hassle.

Support Local
We are a small family business based in Concord, CA. By supporting us, you support Made in the USA and our local economy. In turn, we'll support you throughout your wrap journey!

Enjoy the video

Sponsored

 

[65SoYoLO]

Do you make a waving American flag for the tailgate only?

 

[TWRAPS]

Do you make a waving American flag for the tailgate only?

Not yet, as for the time being I've been focused on our PPF wraps...anything printed would be vinyl. It's on my todo to get into that too though but no ETA yet... I am yet to experiment installation techniques with vinyl, see if I have to modify our cut pattern for it etc.

 

[65SoYoLO]

Not yet, as for the time being I've been focused on our PPF wraps...anything printed would be vinyl. It's on my todo to get into that too though but no ETA yet... I am yet to experiment installation techniques with vinyl, see if I have to modify our cut pattern for it etc.

If you have color PPF I thought you could have a flag in PPF. I don't want vinyl I already screwed up a $50 flag on the tailgate..

 

[TWRAPS]

If you have color PPF I thought you could have a flag in PPF. I don't want vinyl I already screwed up a $50 flag on the tailgate..

Nope you can't have a flag in PPF...the reason is that flags and other graphics are printed and PPF is extruded. You can't extrude anything more than just some simple patterns. It has to be printed and for the time being only vinyl can be printed on. One thing some people do is get vinyl print and "laminate" it with PPF on top, but installation is still dry for the vinyl and a bit trickier in my mind, compared to PPF.

 

[65SoYoLO]

Nope you can't have a flag in PPF...the reason is that flags and other graphics are printed and PPF is extruded. You can't extrude anything more than just some simple patterns. It has to be printed and for the time being only vinyl can be printed on. One thing some people do is get vinyl print and "laminate" it with PPF on top, but installation is still dry for the vinyl and a bit trickier in my mind, compared to PPF.

I'll have to bite the bullet and pay for someone to install it.

 

[deifiex_texan]

I like it but I want to see it in person. Do you send out samples?

 

[TWRAPS]

I like it but I want to see it in person. Do you send out samples?

Yes, we offer our swatch books for rental:
https://twraps.com/products/twraps-color-ppf-swatch-books

If you return within 30 days in good condition - full refund minus the cost of shipping back & forth. If you also buy a wrap from us we will refund the shipping cost too.

 

[vnr111]

Yes, we offer our swatch books for rental:
https://twraps.com/products/twraps-color-ppf-swatch-books

If you return within 30 days in good condition - full refund minus the cost of shipping back & forth. If you also buy a wrap from us we will refund the shipping cost too.

Hi What’s the typical round trip shipping cost? Zip:48009

 

[TWRAPS]

Hi What’s the typical round trip shipping cost? Zip:48009

Round trip CA <-> MI via UPS Ground would be between $18-$24.

Sponsored