Show us an accessory we’ve never seen before! MFZ Challenge thread.

[hemiarch]

Kammock awnings on all three sides, rear awning folds down so I can carry long loads on rack and the roof rack lowers flat to truck, cause it looks cool, spare tire swing arm, air compressor and a rear water cannon for the tailgators.....or to just wash up are a few things I built.

That’s straight up awesome. I have many questions.
What kind of rack are they mounted to? How do you get them parallel to the ground when you open them? What kind of tire swing is that and does it allow FSD/rear camera use?

Sponsored

 

[hemiarch]

Cabin camera cover

Very cool. I use a little laptop camera cover in our x but the CT cam is a little large. Did you 3d print it yourself?

 

[Cybertruck 1974]

That’s straight up awesome. I have many questions.
What kind of rack are they mounted to? How do you get them parallel to the ground d when you open them? What kind of tire swing is that and does it allow FSD/rear camera use?

I built the rack, tire swing. The rack raises level using gas shocks and I built drop down arms to support rack to truck at rear. The rear camera I relocated on top of the rear receiver inside a 2x2 square stock steel mount and works great. Never had an issue with FSD.

 

[hemiarch]

I built the rack, tire swing. The rack raises level using gas shocks and I built drop down arms to support rack to truck at rear. The rear camera I relocated on top of the rear receiver inside a 2x2 square stock steel mount and works great. Never had an issue with FSD.

You are obviously a pretty gifted handyperson.

 

[Cybertruck 1974]

You are obviously a pretty gifted handyperson.

Thanks!!

 

[resellpanda88]

Cabin camera cover

Why cover the camera?

 

[hemiarch]

Why cover the camera?

Sometimes when I’m parked I feel weird about having a lens just staring me in the face. My wife feels the same way. Feels more private at superchargers and such to not have it there.

 

[rudedawg78]

These jumped into my Amazon feed and while I was aware of the vents or rather how exposed they are I just figured yeah I don’t have kids but younger kids of relations do ride in my truck so on the off event that something could fall down in there I decided I really needed these.

Screen covers for the floor vents in the back.

And I realize even with the HEPA filter, they may accumulate dust on the reverse, but that can be vacuumed out.

for Tesla Cybertruck Air Vent... https://www.amazon.com/dp/B0DPP8SLLR?ref=ppx_pop_mob_ap_share

Thanks for the share. Just ordered a set.

 

[Florida]

Very cool. I use a little laptop camera cover in our x but the CT cam is a little large. Did you 3d print it yourself?

I purchased it from Teslation.io. I tried a few laptop camera covers and the wide domed lenses of the Cybertruck cabin camera wouldn’t allow them to sit flush. Also when in the fully open position other camera covers partially obscured the full cabin cameras view leading to possible interference with FSD.

 

[imagemakr]

When driving the beast. Enhancing the interior aroma adds pleasure to the drive.

https://pura.com/products/pura-car-pro

 

[dralkim86]

Does anyone remember when Tesla said that they were going to offer a mod package for boat mode and not just wade mode?

 

[resellpanda88]

When driving the beast. Enhancing the interior aroma adds pleasure to the drive.

https://pura.com/products/pura-car-pro

Is that a carbon dash replacement or just a sticker over the original?

 

[Cybertruck 1974]

You are obviously a pretty gifted handyperson.

Here's the camera location and rack system I built. Canopies are about 1/3 extended as I don't have enought room to open all the way. I also have telescoping poles to support the canopies when I put my solar panels on top of them and anchor down in high winds.

 

[hemiarch]

Here's the camera location and rack system I built. Canopies are about 1/3 extended as I don't have enought room to open all the way. I also have telescoping poles to support the canopies when I put my solar panels on top of them and anchor down in high winds.

That is SO cool

 

[resellpanda88]

https://www.amazon.com/dp/B0G1GBDBHX?ref=ppx_yo2ov_dt_b_fed_asin_title

just ordered this and hoping it would work well for my needs. usb a to my rj11 radar and usb c to my qi wireless charger.

Sponsored