TWRAPS Satin Black Magic Purple PPF wrap

[TWRAPS]

Hey folks

Featuring yet another color PPF wrap DIYed by a customer: Satin Black Magic Purple

As a reference, you can get your Cybertruck DIY wrap or choose one of our locations for Pro Install. We offer over 300 colors from our store:
https://twraps.com/products/cybertruck-ppf-color-wrap

You can browse our digitalized TWRAPS Swatch Books at the below link, notice you can filter by finish, color etc:
https://twraps.com/collections/twraps-paint-protection-film

This is 8mil PPF, TPU based, self healing and non fading. The cut pattern is developed by me using my own CT and iterating over and over when wrapping customer CTs to achieve perfection and ease of installation (especially the edge wrapping).

Pro Install
If DIY is not your thing, you can get our wrap professionally installed at one of these locations. We help coordinate everything, so you have a seamless online experience.

• Concord, CA ($2,000)
• Columbus, IN ($2,000)
• Atlanta, GA ($2,500)
• Oklahoma City, OK ($2,000)
• Pottstown, PA ($2,500)
• Las Vegas, NV ($2,500)
• Charleston, SC ($2,500)
• Chicago Metro, IL ($3,000)

Enjoy the video


And here are some more photos:

Sponsored

 

[ChiTownCT]

If your going to buy a DYI wrap from any Vendor I highly advise you to go with TWRAPS, my second attempt at wrapping has been succesful with the help of OP. Not too many folks out there will share their own personal cell and answer any questions you may have while your in the process of installing the wrap. TWRAPS has made the DYI wrap game much much easier.

And I promise I was not paid to give a review, I just love good old fashioned customer service, and when someone offers their time to help a novice they need to be recognized..

 

[TWRAPS]

Thank you so much ???

 

[hemiarch]

That looks awesome. Nice job. So, all told, what was the cost of the diy route? Factoring everything you can think of that had a cost.

 

[GregimusPrime]

Where do you guys have shops?

 

[GregimusPrime]

Where do you guys have shops?

 

[yrekabaker]

Nice!

 

[TWRAPS]

That looks awesome. Nice job. So, all told, what was the cost of the diy route? Factoring everything you can think of that had a cost.

Other than the cost of the kit (which comes with 2 squeegees and an edge tool), you'd need:
* 2 spray bottles (varying cost, depending on what you want to use, but let's say around $30-$40)
* Liquid soap ($10 if you don't have any?)
* Heat gun or a hair dryer ($15-$20 for a simple one, if you don't have either)

Then you have optional things like foldable tables ($120-$140 depending on what you want to get), some people get magnets if they don't have a helper ($15), some people get PPF primer ($20), some people get plastic scraper ($10)...i.e. it varies largely on what you already have at home. If you don't have anything let's say you have about $200-$300 more in cost, if you have most things it could be $0 more than what you paid for the PPF kit.

Where do you guys have shops?

Concord, CA
Austin, TX
Houston, TX
Indianapolis, IN
Atlanta, GA
Port Charlotte, FL
Oklahoma City, OK
Chicago Metro, IL
Pottstown, PA

To clarify - our factory is in Concord, CA but we no longer offer installations, as there was more demand than I can handle and I found it too difficult (and not core business) to expand that internally, so I've decided to partner with shops to install our products and provide a seamless purchasing and scheduling experience.

 

[Cactusrick]

Hey folks

Featuring yet another color PPF wrap DIYed by a customer: Satin Black Magic Purple

As a reference, you can get your Cybertruck DIY wrap or choose one of our locations for Pro Install. We offer over 300 colors from our store:
https://twraps.com/products/cybertruck-ppf-color-wrap

You can browse our digitalized TWRAPS Swatch Books at the below link, notice you can filter by finish, color etc:
https://twraps.com/collections/twraps-paint-protection-film

This is 8mil PPF, TPU based, self healing and non fading. The cut pattern is developed by me using my own CT and iterating over and over when wrapping customer CTs to achieve perfection and ease of installation (especially the edge wrapping).

Enjoy the video


And here are some more photos:

Nice choice looks good. Our wrap is about a year old, Blackberry. We recently took off mirrors and added running boards - have fun!

Sponsored