Cybertruck wrapped in TWRAPS Matte Liquid Metallic Dracaena Red PPF

[TWRAPS]

Hey gang

Showcasing another beautiful wrap DIYed by a customer. He went with a dual color option - gloss black on top with Matte Liquid Metallic Dracaena Red on the bottom.

Why TWRAPS?

🦾 DIY Wrap
We've developed the most advanced CT wrap template on the market using our own CT. How is it different?

• Designed in-house and iterated with changes based on real world feedback, with bespoke relief cuts (not generic) and 1/2" wrap around the edges for long lasting hold
• Most beginner friendly with full install video (2hrs long)
• 0 disassembly required!
• Wraps in places others didn't even see (such as the back side of the quarter panel, near the tail lights)
• Gives you shop level results with a pre-cut kit
• So far - 100% success rate (just check the customer reviews). Most people report full install takes them 8-10 hours.

Check it out:
https://twraps.com/products/cybertruck-ppf-color-wrap

Live Install Support
For those of you who DIY, we offer live install support via phone, video, text and email, including on weekends. Meaning that if you run into any issues or have any questions during the install, there will be an experienced installer ready to help you remotely within minutes.

Pro Install
If DIY is not your thing, you can get our wrap professionally installed at one of these locations. We help coordinate everything, so you have a seamless online experience.

• Concord, CA ($2,000)
• Columbus, IN ($2,000)
• Atlanta, GA ($2,500)
• Oklahoma City, OK ($2,000)
• Pottstown, PA ($2,500)
• Las Vegas, NV ($2,500)
• Charleston, SC ($2,500)
• Chicago Metro, IL ($3,000)

Colors
We offer over 300 colors of PPF.
You can browse our digitalized TWRAPS Swatch Books at the below link, notice you can filter by finish, color etc, or you can just rent the physical swatch books for a refund once you return them.

• Browse the Digital catalog
• Rent the Swatch Books

Quality
TWRAPS is premium 8mil PPF, made with US sourced TPU resins and glue. It's self healing (with heat), chemically resistant with UV blocking additives to reduce fading over time. With good care, it will last for 7-10 years. And when you need to remove it, it comes off clean (with heat again) letting you either change colors, go back to the CT's birthday suit or just return your lease without hassle.

Support Local
We are a small family business based in Concord, CA. By supporting us, you support Made in the USA and our local economy. In turn, we'll support you throughout your wrap journey!

Enjoy the video

Sponsored

 

[RdgRob]

I'll vouch for TWraps. Just finished wrapping my CT in Their Matte Ghost Metallic Green. My son and I did it in about 2 partial days over the holidays. Looks awesome. Kit was great, Illya was amazingly helpful and patient, the install video and kit were great (need to buy more microfiber cloths though), and it came out beautiful. My only comment is I think it probably is better to do in warmer time of year (we tried heating garage but still couldn't get it about about 50 degrees) and I think that may have made some of the edges a little more difficult to fold over and stick. Either way -- highly recommended.

 

[davecox37]

wow, definitely some nice looking options! can this be done on a year old vehicle, containing what I presume is now imperfections on the body or am I too late? what is maintenance like afterwards? still no car washes I presume, how do those of you with wraps, any kind, find cleaning? I just came back from a short spot cleaning session with Tesla washless wash and a cloth. don't have enough stamina!

 

[Ralphiefar]

I'll vouch for TWraps. Just finished wrapping my CT in Their Matte Ghost Metallic Green. My son and I did it in about 2 partial days over the holidays. Looks awesome. Kit was great, Illya was amazingly helpful and patient, the install video and kit were great (need to buy more microfiber cloths though), and it came out beautiful. My only comment is I think it probably is better to do in warmer time of year (we tried heating garage but still couldn't get it about about 50 degrees) and I think that may have made some of the edges a little more difficult to fold over and stick. Either way -- highly recommended.

 

[Ralphiefar]

Lliya is amazing. Was guiding me the whole way this summer. I still keep in contact with him. Was the reason I ended up going with TWRAPS

 

[TWRAPS]

wow, definitely some nice looking options! can this be done on a year old vehicle, containing what I presume is now imperfections on the body or am I too late? what is maintenance like afterwards? still no car washes I presume, how do those of you with wraps, any kind, find cleaning? I just came back from a short spot cleaning session with Tesla washless wash and a cloth. don't have enough stamina!

You can totally do it on a year or older vehicle. With the CT there isn't much prep that you need to do - just wash it really well. Car washes are also perfectly fine, as long as you first fold the edges and let them cure (in colder weather curing takes longer, so I'd give it a week just in case). I've been doing gas station car washes for a long time now with 0 issues.

 

[WHIZZARD OF OZ]

Hey gang

Showcasing another beautiful wrap DIYed by a customer. He went with a dual color option - gloss black on top with Matte Liquid Metallic Dracaena Red on the bottom.

Why TWRAPS?

🦾 DIY Wrap
We've developed the most advanced CT wrap template on the market using our own CT. How is it different?

• Designed in-house and iterated with changes based on real world feedback, with bespoke relief cuts (not generic) and 1/2" wrap around the edges for long lasting hold
• Most beginner friendly with full install video (2hrs long)
• 0 disassembly required!
• Wraps in places others didn't even see (such as the back side of the quarter panel, near the tail lights)
• Gives you shop level results with a pre-cut kit
• So far - 100% success rate (just check the customer reviews). Most people report full install takes them 8-10 hours.

Check it out:
https://twraps.com/products/cybertruck-ppf-color-wrap

Live Install Support
For those of you who DIY, we offer live install support via phone, video, text and email, including on weekends. Meaning that if you run into any issues or have any questions during the install, there will be an experienced installer ready to help you remotely within minutes.

Pro Install
If DIY is not your thing, you can get our wrap professionally installed at one of these locations. We help coordinate everything, so you have a seamless online experience.

• Concord, CA ($2,000)
• Columbus, IN ($2,000)
• Atlanta, GA ($2,500)
• Oklahoma City, OK ($2,000)
• Pottstown, PA ($2,500)
• Las Vegas, NV ($2,500)
• Charleston, SC ($2,500)
• Chicago Metro, IL ($3,000)

Colors
We offer over 300 colors of PPF.
You can browse our digitalized TWRAPS Swatch Books at the below link, notice you can filter by finish, color etc, or you can just rent the physical swatch books for a refund once you return them.

• Browse the Digital catalog
• Rent the Swatch Books

Quality
TWRAPS is premium 8mil PPF, made with US sourced TPU resins and glue. It's self healing (with heat), chemically resistant with UV blocking additives to reduce fading over time. With good care, it will last for 7-10 years. And when you need to remove it, it comes off clean (with heat again) letting you either change colors, go back to the CT's birthday suit or just return your lease without hassle.

Support Local
We are a small family business based in Concord, CA. By supporting us, you support Made in the USA and our local economy. In turn, we'll support you throughout your wrap journey!

Enjoy the video

We built a '55 Oval Beetle in '85 with this colour combo...'Johhny Bee' Good' was built in 40 days and driven across the border to take the major prize at The Day Of The Volkswagen.
It cost $2000 all up! Those were the days!

Sponsored