• Welcome to Tesla Roadster Forum! If you're joining us from Cybertruckownersclub.com, then you may already have an account here.

    If you were registered on the Cybertruck forum as of September 18, 2026 or earlier, then you can login here with the same username and password.

    If you wish, you can remove your account here.

Recent content by TickTock

  1. TickTock

    $50 Dry Wipe Fix (almost)

    You know, I actually did consider this when I first got the truck before we had FSD just because I hated the BAW so much. It's a big ugly wart on an otherwise beautiful machine. But quickly dropped the idea for safety. Even though I think it would be fine most of the time, there are times...
  2. TickTock

    $50 Dry Wipe Fix (almost)

    This does not work reliably for me. It will switch back to AUTO after some time automatically. After a while I get annoyed and just drop out of FSD. Trust me, I would not be going through all this trouble if simply turning it off worked.
  3. TickTock

    $50 Dry Wipe Fix (almost)

    I am not sure. It does expect a message back from the wiper. Whether it is just an acknowledge of the message received or if it waits to complete the wipe before indicating success I do not know at this point. Once I start sniffing the LIN I should be able to figure all that out. I am...
  4. TickTock

    $50 Dry Wipe Fix (almost)

    I doubt they will. They won't even let us set the max speed. They need to fix whatever algorithm they use to determine the windshield needs wiping. It seems either it isn't high priority or they are unable to. My camera feed looks crystal clear and it keeps putting me back into auto -...
  5. TickTock

    $50 Dry Wipe Fix (almost)

    Doesn't work. FSD turns them back on.
  6. TickTock

    $50 Dry Wipe Fix (almost)

    TLDR: Works but requires a system reset to get wipers working again :( Thought I would share an experiment I tried to eliminate "dry wipes" that almost worked. The Idea was to use a 48V relay with the coil connected to the frunk power feed and the NC (Normally Closed) terminals as a breaker to...
  7. TickTock

    Fix for Door Vibration Bass Drum Rumble at high-speed/cross-winds -- Service Bulletin SB-25-10-002 (Inspect Door Assemblies For Low-Pitched Noises)

    I probably spent about 8 hours total to do two doors. Getting that first top trim piece off without breaking it is really difficult. The air bag is a critical tool IMO of the process (could stuff it down near the pegs and apply pressure locally) but I ended up also using a half dozen different...
  8. TickTock

    FSD v14.2.2.4 (Update 2025.45.9) happening now

    Confused. You refuse to park it yourself? I generally take over just because it takes SOOO LONG.
  9. TickTock

    Fix for Door Vibration Bass Drum Rumble at high-speed/cross-winds -- Service Bulletin SB-25-10-002 (Inspect Door Assemblies For Low-Pitched Noises)

    It does! I only did the front two because that's where I heard the bass distortion and vibration. Now that those are fixed, I can hear it coming from the back. Sound aside, it just makes the truck feel more solid. So glad I did it and am definitely doing the rear doors now that I know first...
  10. TickTock

    Fix for Door Vibration Bass Drum Rumble at high-speed/cross-winds -- Service Bulletin SB-25-10-002 (Inspect Door Assemblies For Low-Pitched Noises)

    I am halfway through this upgrade. Waiting for the goo to dry before buttoning it up but here's a before and after of the sound. Before: After:
  11. TickTock

    Evotrex PG5: the RV Trailer that makes its own power (270+ kWh of usable energy)

    Has anyone figured out the power output of the onboard generator. I watched the whole thing and never saw the power output. Just the total energy available (225kWh) from the onboard gas storage and the power output of the inverter (12kW) which is only good until the battery depletes. This is...
  12. TickTock

    Rear Emergency Door Release Identifier (3D Print)

    You got it. There are instructions in the Description: Description The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket. This makes it very unlikely to be found should an accident render the electronics unresponsive which could be...
  13. TickTock

    Rear Emergency Door Release Identifier (3D Print)

    I am not familiar with Bambu, but on PrusaSlicer, you place the base, then right-click it, select Add-->Load then select the text stl file. It is automatically attached to the base in correct position. After that, you can save the plate as a .3mf file which includes everything. I would think...
  14. TickTock

    Rear Emergency Door Release Identifier (3D Print)

    Decided to try out PCTG on one side of my truck. It is supposed to offer superior impact strength, higher heat resistance, and better chemical resistance (although I do not anticipate any issue with PETG either - it has been my go-to material for a long time). While I was at it I thought I...
  15. TickTock

    NEW! OEM Front Bumper Winch Receiver Mounts!

    Could be useful to mount a lot of things... Dang it - they are out of stock! https://www.deactivated-guns.co.uk/product/en-gb/deactivated-exceedingly-rare-ww2-us-airforce-bomber-m2-50-cal-machine-gun
Top