Thin wheel spacers (less than 1")

[stillak]

I am looking for wheel spacers which are thinner than one inch.

I tried the UP 30mm spacers, they were great in the front but too much for the back in my opinion.

I'm having a hard time finding wheel spacers thinner than 30mm. Ideally looking for 15mm or 12mm spacers.

Sponsored

 

[petercyber]

check out Bonoss, they are incredible. Super high quality. https://www.bonoss.com/home

 

[stillak]

Thanks for the suggestion. Looks like the thinnest they have is 25mm.

I researched and the studs for cybertruck are likely too long for thinner bolt on spacers.

Eg. If i put 15mm bolt on spacers, the stock studs will likely still be protruding out and will need to be trimmed

Unfortunately i dont know the exact size of the studs but I'm guessing 25mm is the thinnest spacers possible.

 

[hemiarch]

What’s the benefit of these? Can you please educate me?

 

[petercyber]

Thanks for the suggestion. Looks like the thinnest they have is 25mm.

I researched and the studs for cybertruck are likely too long for thinner bolt on spacers.

Eg. If i put 15mm bolt on spacers, the stock studs will likely still be protruding out and will need to be trimmed

Unfortunately i dont know the exact size of the studs but I'm guessing 25mm is the thinnest spacers possible.

You can customize it, look at the link below.

https://www.bonoss.com/product/bono...esla-cybertruck-6-lug-wheel-spacers-al6061-t6

 

[gtgarner]

What’s the benefit of these? Can you please educate me?

Looks! That's it.

Some people like how their wheels look with spacers.

It's a ton cheaper than buying wider rims and tires.

 

[hemiarch]

Looks! That's it.

Some people like how their wheels look with spacers.

It's a ton cheaper than buying wider rims and tires.

Got it. I guess within reason it shouldn’t affect range too much or throw dirt onto the sides of the car or affect the steering/suspension geometry a lot. I can see how that’s a subtle increase in aggressive appearance for not too much money.
Thanks for explaining. Had a hard time figuring out the rationale.

 

[stillak]

You can customize it, look at the link below.

https://www.bonoss.com/product/bono...esla-cybertruck-6-lug-wheel-spacers-al6061-t6

I took the wheels off and measured the studs. They are near 28mm. If you get spacers with less width than that you'll need to trim the studs

Sponsored