Search results

I'm trying to get the bracket kit. Tesla specs 3M PT1500 1.52 mm (0.060 in) but I am looking at 3M VHB MAX series tape which uses Max Promoter. It has 2x the strength...

No external adjustment. Larger piston moves more fluid per amount of travel increasing shock response. Finned body and ext reservior reduce fade. The Zone control Rco Rebound (RCO) cut-off is said to allow more extension travel than OEM Between the electronic valve size, increased piston...

While plowing its going to be primarily pushing on the frame. The hitch adapters will be pushed into the face of the frame for the most part and good plows have trip springs that will tip the blade if the edge makes contact with something hard enough. No need to tie the two hook points...

There are F150 size plows and there are F350 size plows. I would not do a large commercial operation with a F150.... If someone wants to do their home drive and a relative or two nearby... a pretty basic plow like this F150 Lightning with tow hook replacing mounts will work.

That will work for 2" reciever plows like people have been running on the rear to do their place or like 1 or 2 properties.

You need to spin these off into a plow mount.

I really think they should have chemically etched (looks frosted) the glass where the lightbar adhesive is applied, alcohol clean then BETACLEAN™ GC-800 NHTSA Part 573 Safety Recall Report (25V735) findings were techs used the glass pimer on the plastic bar and the plastic primer on the...

The toyo AT III EVs are awesome. Cybertruck Snow King via @YouTube

DId it before Halloween. Now I want to do the xpel armor to the caps, flares and lower doors.

I used a portaband and it took 30 seconds per side to snip off. I will run hard offroad with reduced airpressure. I think untrimmed would rub doing that...

I have had them a while. Tuesday I started driving in rain which became a blizzard and 4" of snow at my destination. They worked so good.

UCAs sell. With the Raptor and others people upgraded as much or even more so for more travel. typically removed sway bars and longer travel shocks needed more angle at the upper ball joint at full droop or extension. So they go to a uni ball joint and even 1" of lift requires caster...

They gave my an X plaid for a loaner. OMG... Think I'd want to trade my 3LR for one and keep the CT AWD instead of having a 3LR and beast CT.

The armor looks awesome...

I'm probably just going to do quick release fasteners for the defuser. On for range, off quick for wheeling. First I'll run with it off for a while and see range effect.

Mine jumped from ready for service to complete but I got a message saying probably completed the nest day, then another let you know by 4 the nest day to around 4 saying it was done. I said I was on the way, what my ETA was and asked them to DCFC my truck. When I got there it was almost...

Once it's in their service mode the app isn't showing you much. My SC only had it overnight and I got a X Plaid to use.

The 360W vs 430W rating all depends on the temperature. It's probably the same unit. At 25c its 430W and at 40c its 360W.

Temporary, screwed into frunk liner next to the winch battery. I'm working on a hidden mount for the DC/DC converter and a custom battery pack that fits in the winch bumper. I used the frunk L track to mount the batt tray.