YukonJack's latest activity
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.Posi-Tap 20-22 ga. Mini - Pack of 6. The Best Line Tap You'll Ever Use! (Choose Your Gauge Size and Amount) (6, 20-22 Mini)... -
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.I looked at digikey, mouser and others for this Rosenberger automotive fitting but no luck. And even if I found it I need to get the...
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.I believe X0806 is circled in Green. Colors Match. Very easy to get to…
-
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.You can adjust the set-point for when it enters low power mode to either 20% or 10%. So you can drop this down to 10% and likely...
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.Update: Went on my first long haul trip with this mod over the weekend. You need to know that when your SOC gets down to 20% the...
-
UPDATE as 4pm on 1/15: Tesla Service in Anaheim said he ran my problem up the ladder and got the repair approved for me. Woo hoo! The...
-
YukonJack replied to the thread How does a mouse get it the CT?.I have some of these placed around my CB. I refilled them a few times already. Tomcat Mouse Killer Child...
-
YukonJack reacted to mongo's post in the thread Powering Accessories Struggles - Don't let this happen to you! with
Like.
Chopped off pass through power cord in the first photo: -
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.Where to cut the Hansshow harness: Follow the USB-C plug down past the small box (12V to 5V Converter) and you will see they have the...
-
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.I’ve completed a 12V DC supply solution that works for me. I routed a 12VDC supply line to the passenger foot well for the Hansshow V2...
-
-
YukonJack reacted to Urander's post in the thread Trick to get FSD working with the tailgate down with Like.
Just doing some truck things today, but the load was just a bit too long to close the tailgate. After sitting in traffic for over an...
-
YukonJack reacted to yrekabaker's post in the thread Got a flat and had to replace tire. What next? with Like.
I just replaced my factory Goodyears with Michelin Defender LTX Platinum all weather tires- mileage warranty 70K miles. I do not go off...
-
YukonJack replied to the thread Are outlets in the bed active / live while driving?.Confirmed. I've been testing this to confirm if I can use the console outlet for a 12VDC power supply and fuze box in the kick panel...
-
YukonJack reacted to Fort Worth Cyber's post in the thread Doug Demuro the hater…thoughts on his latest comments? with Like.
I didn’t buy my Beast expecting to sell it for a good price. I bought it because it’s the best vehicle I’ve ever driven.
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.I had a hard time thinking they tapped an analog line but thats what this appears to be. I'm no audio tech but who knows what type of...
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.I've been digging into this and found out some interesting details on the Audio system tech. Validate all this for yourself if you...
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.The fix here is Hannshow providing a harness with the pass through for pin 8. Sometimes the deeper you go with Grok, or other AI, the...
-
YukonJack replied to the thread Powering Accessories Struggles - Don't let this happen to you!.I just received my V2 Rearview last week as I was planning to upgrade from V1. I used a continuity tester and rang out the harness...
-
From someone who owned a 2013 Tesla Model S, and the plan was "keep it forever", it did not happen. There where serious early adopter...
-
YukonJack replied to the thread Show us an accessory we’ve never seen before! MFZ Challenge thread..Thanks for the interest in buying this, but it isn't something worthwhile to tackle again. This was a DIY project using some leftover...
-
YukonJack reacted to rtfitch's post in the thread FSD 14.2.1 (Update 2025.38.9.6) Rolling Out with Like.
IMPRESSED!!! Just put Blitzen through a genuinely serious road-construction gauntlet — the kind of chaotic mess where cars were spilling...
