• Welcome to Tesla Roadster Forum! If you're joining us from Cybertruckownersclub.com, then you may already have an account here.

    If you were registered on the Cybertruck forum as of September 18, 2026 or earlier, then you can login here with the same username and password.

    If you wish, you can remove your account here.

Recent content by Eyesore

  1. Eyesore

    Aftermarket Front Receiver / Hitch Mount for Cybertruck? (For Snow Plow)

    Yeah, it works well for my climate, but I don’t get that much snow. I’m in the Pacific Northwest, at about 500 foot elevation in the foothills of the Cascades. The only concern I have with this plow is if you drive over the snow before you scrape it, It packs down a bit and you can’t get it...
  2. Eyesore

    Stealth back up light bar DIY project

    No, mine does not detect a trailer after I used the pigtail plug-in and the LED backup light. I found out recently that even if you have a trailer connected, you can go into trailer profiles and toggle the trailer profile button so it does not use the trailer profile. Then FSD works. Use...
  3. Eyesore

    Camp mode with CPAP machine - roof power supply tap, 48V to 24V converter, CPAP shelf, Molle panel.

    The 2025 Spring Update (version 2025.14) includes a feature called "Accessory Power" for other Tesla vehicles (S, 3, X, and Y), which re-enables 12V sockets and USB ports to stay powered when when the vehicle is parked and unoccupied, without needing Camp Mode. If the 48V roof tap remains...
  4. Eyesore

    Aftermarket Front Receiver / Hitch Mount for Cybertruck? (For Snow Plow)

    SNOWSPORT® HD Utility Plow from Agricover https://www.agricover.com/snowsport/hd/ There is no power or controls needed, it slides up and down on two posts, and tilts back when you reverse. You can't back blade with it unless you add a strap to hold it down. The do have an elecric winch...
  5. Eyesore

    Aftermarket Front Receiver / Hitch Mount for Cybertruck? (For Snow Plow)

    Me too. Tried plowing backwards with the camera. It works pretty good, but I prefer to have something in the front.
  6. Eyesore

    Camp mode with CPAP machine - roof power supply tap, 48V to 24V converter, CPAP shelf, Molle panel.

    I've decided not to try to power my CPAP from the 48V roof tap. I can't get the the roof tap to stay on unless I leave the climate control on (camping mode) or the inverter on (outlets always on). This defeats the purpose of reducing the demand on the truck battery to run the CPAP...
  7. Eyesore

    Finding always-on 48v in the cabin or bed

    I've decided not to try to power my CPAP from the 48V roof tap. I can't get the the roof tap to stay on unless I leave the climate control on (camping mode) or the inverter on (outlets always on). This defeats the purpose of reducing the demand on the truck battery to run the CPAP...
  8. Eyesore

    Stealth back up light bar DIY project

    The taillights (and I assume reverse lights) are 48v, not so easy to procure. There is a warning in the owners manual about tapping the 48v system (quoted below). Could run 12V using a buck converter, but see point #2. I wanted to maintain the stock wiring. I just added a plug-in pig tail...
  9. Eyesore

    Finding always-on 48v in the cabin or bed

    We get conversions losses going from 800V DC to 120V AC, then again from 120V AC to 24V DC. I'd rather go from 48V DC to 24V DC, and not run the inverter all night.
  10. Eyesore

    Finding always-on 48v in the cabin or bed

    I'm now thinking that I'll fish wire under the rooftop applique and drill a hole in the sidewall for a bulkhead DC power socket. There appears to be plenty of room in the sail panel, if you can avoid hitting the casting. Screengrab from youtube, @Dblcapcrimpin...
  11. Eyesore

    Camp mode with CPAP machine - roof power supply tap, 48V to 24V converter, CPAP shelf, Molle panel.

    I think I'll run a permanently connected wire from the roof power tap under the sail applique and into a 48V power jack bulkhead connector I add to the side of the bed.
  12. Eyesore

    Finding always-on 48v in the cabin or bed

    I'm going to run a 48V feed from the roof to my bed for a CPAP. Any tips or pics of how you routed the wire?
  13. Eyesore

    Camp mode with CPAP machine - roof power supply tap, 48V to 24V converter, CPAP shelf, Molle panel.

    I like to camp in the back of my Cybertruck, and my CPAP machine gets in the way. Drawing power from the 110V outlet using a power supply is inefficient. This is what I have in my Amazon cart: The barrel connector is what my Resmed Airsense 10 needs for a 24V, 3.75A (90W) connection. My...
  14. Eyesore

    Stealth back up light bar DIY project

    One strange thing I recently noticed. When the car is on, the backup light strip blinks with very low power, barely discernible in the daylight. I'm interested in theories as to why it would do that. This is wired in to the trailer backup light circuit. Once the car goes to sleep, the...
Top