Recent content by chris_ace_14

I have this problem too. I caught it on video.

I can print it for you.

I have mine rolled up and tucked in behind the stainless steel sails.

Completely agree!

I can print and send you one.

The new tap to zoom in/out is better. But I still prefer having the video feed on my rearview mirror and being able to look in my bed too. To each their own…

Nice! How’s your wind noise at 50+ mph?

Difficulty: 3/10 Time: 60-90mins

https://www.thingiverse.com/thing:6849986

Thanks for the tips! I was able to hide the thick connector inside the 3D print housing. That allowed me to tuck all the wires between the grooves so it’s not visible. Nothing is sticking out anymore

yeah i don’t have abs/asa. So PETG will have to do for now. I sprayed coats of UV to help. I don’t park outside. But if it warps/melts. I’ll just reprint it again.

so I 3D printed the file provided (using Bambu p1p) and then I sprayed a few layers of UV clear coat on it too. Applied double sided tape to the bottom and was able to tuck more wires inside the housing (including the connector) so this is much cleaner Install! Super happy with the results !

the resolutions and night vision is superior on the hansshow. You can’t zoom in on the hansshow but you can drag your image up or down. Hansshow is a bit wider than the tailgate camera. I’ll try to take comparison pics later.

I thought the same thing. But wireless latency might be an issue. Plus the camera still needs wires for power too.