Thanks for the info about the interior hole a few inches lower. I popped loose the door trim and located it from the inside. It took some contorting, but I was able to connect the dots with a piece of pull wire. I finally have a path inside the cabin. Yay!
I got as far as this grommet, but when I pop it out, there doesn't appear to be a path behind the dash at all; the hole opens up into the frame, nothing but a steel channel up and down behind it. Did you have to pop off panels inside the cab to find another hole in the frame to fish it through...
I just mounted a scanner under my center screen last weekend. I didn't need to drill any holes, so it's easily removable. I used about $10 worth of a $20 set of brackets. I'm happy with the way it just floats there. Thinking of doing a write-up or video if there's interest.
The Cybertruck Service manual has a whole procedure to remove and re-install the panel it's connected to, but doesn't say what the device is that it houses: https://service.tesla.com/docs/Cybertruck/ServiceManual/en-us/GUID-E86A9772-BDD3-491C-A1E3-41D16715C4C3.html
My first thought was cabin...
I took my CT into service, got a bit of a runaround, but now it's all fixed. I dropped my truck off the night before my service appointment. Got a note in the Tesla App late the next day that the service appointment was done. Went to pick up my CT and they said they were unable to replicate...
This is going to drive me insane! Happens when I put pressure on the seat back, and when I release pressure, like accelerating and braking. My center console is pretty noise free. I think it’s coming from the seat back hinge?