If you are getting a PowerWall you do not want the 3V gateway (which was free for FS). Instead say you don't want the free equipment and redeem for $2500 shop credit.
PW installations will be Powershare enabled with a softwares update this year. With PW and truck connected you get the...
No idea. It flooded in FL and died a few weeks later when low voltage system gave out. Battery was at 50%. Somehow it booted up again in Ukraine in Service mode. Has the Blue Snowflake icon in the app ❄️... indicating degraded performance.
After flood damage my seat was full forward and I couldn't get in. Took the switch apart with no luck.
In service menu there is an option to recalibrate seat. It runs through all seat axies stop to stop. Got me back in my soon to be totaled truck so I could limp it away from house.
Truck...
I need to do the math to see if it works for me. We have 50% super off peak rates after midnight...about 10¢ kWh. So I can charge 2 vehicles and PW3 then. Peak time is when people come home from work, like 5-7 pm. Then you pay a little more than flat rate plan, about 16¢ per kWh.
Correct. 1 PW only drives 11.5KW (48 A on 240 V) for 13.5 kWh.
That's infinitely more than a bloated 3V gateway without the truck connected.
With PW AND the Truck plugged in you get 2x the Power....48A x 2, or roughly 100A service. And the capacity of 10 PW.
For extended outage, unplug...
Way steep for install unless u have something really complicated.
For that price you could gain Power share functionality by installing a PowerWall....about 15K, but 1/3 tax credit.
With PowerWall option for Powershare, you also get:
1. Seamless instantaneous backup
2. Backup if your truck...
Steel makes its own protective layer called passivation. Basically a light acid removes all stains and then the new layer builds up. Once properly passivated, truck is much easier to keep clean and resists staining and fingerprints better.
I used Tesla recommended Citrisurf 77. Wipe on, let...
Look in service menu and try and decipher alerts. When my flooded truck was dying it said some components didn't have the right firmware for the current build. Also an option there to reload software.
But best to wait for service.
There are a bunch of press on to lock in place hose fittings. Manual says to pull to make sure it locked. My guess is one of the hoses popped loose. We heard a loud pop and hiss when driving home from delivery.
The com wire isn't necessary for the "already have powerwall" scenario. I believe the PW will be able to communicate to the truck via power line communications.
I believe if you try to register for PowerShare via Qmerit, you will be denied because you already have powerwall..
Here are the...
Right.... Around peak I would have had to crawl out side window to go re-engage Wade mode.
Insurance asked some weird questions. Like were you in a mandatory evacuation zone. Like maybe there is some kind of exclusion. Need to go read the fine print before I talk to them again.
Tesla is...
I think the 30 min limit is a liability issue. Probably good for up to an hour? But if I was thinking straight in the heat of the battle I could have gone out to the truck and re-engage Wade mode.
I also could have tied off the boat! Surge was fast and we didn't think it would be that high...
Exactly. I drove it in limp mode... Which is 4 mph up the hill on the other side of the street. When I got there I engaged Wade mode and it took every bit of 10 minutes to be fully activated. During that process there was water draining from the vehicle.
Stupid me. I could have done that...